Window Wells: How to Prevent your from Flooding

 In Basement Finishing, Delaware, Maryland, New Jersey, Pennsylvania, Uncategorized, Waterproofing

Having windows and window wells in your foundation makes a huge difference in your basement.

Window wells let in natural light.  That’s not usually enough to completely illuminate the basement space but it does prevent the place from feeling like a dungeon.

Also, windows allow for ventilation in the basement and prevent a stuffy, musty atmosphere.

If the home has an emergency egress way, it creates a means of escape from fire or other disaster, especially when the basement is used for living space.

However, windows also represent a breach in the foundation wall and, if the wells are flooding, that water can end up in the basement.

So, how can this be prevented?

Preventing Basement Wells from Flooding

A properly designed and installed a well will be sized appropriately for the window, bolted securely to the foundation wall and feature a functioning drain that carries water into a drain tile system or out to daylight.

If any of these features are missing or compromised, the window well is likely to flood.

A wrong-sized well is a rare occurrence.  As long as the window well liner is wide enough to be attached to the foundation wall and not the window itself and high enough to extend above ground level it should not present any problems.

If, however, the liner becomes detached from the foundation wall due to rusted or corroded fasteners or improper installation, then soil pressure can widen the gap between the loose liner and the wall and force water into the well when the soil becomes oversaturated.

Fixing this requires some digging and either reinstalling or replacing the window well liner, ensuring that it is solidly attached — well worth the effort.

The most common reason for window wells flooding, however, is a clogged or missing drain.  A well should have a central drain that is either connected to an interior or exterior drain tile system or to a line that runs to a storm water drain or out to daylight.

Sometimes, in “quick-and-dirty” construction or remodeling, a contractor will slap in a  well without a drain simply to allow light in through the window.  This is obviously not a good idea because the first heavy rain is likely to turn that window into a pool of water.  We at Basement Solutions 911 are experts in egress ways for basements and we will ensure that your well is properly installed.

More often, the drain is there but becomes clogged with debris such as leaves, soil or landscaping materials.   This will cause the drain to run slowly or not at all.

Obviously, the only cure for a missing drain is to put one in.  Preventing a drain, either new or existing, from clogging is as simple as installing a well cover.

Well covers are often misinterpreted as a means of keeping water out of a window well – blame those inexpensive plastic bubbles from the hardware store for that.  In fact, a well cover is intended to keep debris out of the well, prevent weed growth and serve as a deterrent to small animals making their home there.

Skip the plastic bubble cover – they rarely fit well, break easily and often create a “terrarium” for weeds in the window well.  The best well cover is custom-made for a specific well and made of steel-reinforced polycarbonate plastic.

They will stand up to sunlight and bad weather and provide lasting protection for the window well, the window itself and, ultimately, the basement.

FOR MORE INFORMATION ON OUR BASEMENT WATERPROOFOING AND WINDOW WELLS INSTALLATION SERVICES , CONTACT US TODAY

Recommended Posts

Leave a Comment

Contact Us

We're not around right now. But you can send us an email and we'll get back to you, asap.

Start typing and press Enter to search